ARADING online large-scale selective wave soldering AS510
Date：2020-11-20 Hits：897
Advantages of each module of the machine
1. Flux spraying unit, saving energy and flux
2. The product preheating unit has fast efficiency and stable temperature
3. Excellent welding unit quality, fast efficiency, and high safety
4. Convenient maintenance and upkeep
5. Easy to operate and learn
- Product Details
| 阿拉玎AS510選擇焊規格參數 | |||
| 基本配置和要求(Basic Configuration) | 產品運輸系統(Transportation System) | ||
| 外形尺寸(Machin Size) | L*W*H= 2450*1850*1600 mm | 導軌調寬方式(Resizable ) | 軟件設定調整寬度,0.5mm喇叭口( Automatic) |
| 工作范圍(Working Area) | L500 × W580 mm | PCB傳輸方式(Transport) | 全部3段采用滾輪傳輸,最大承載15kg(Roll) |
| 電力要求(Electrical) | 5線 \ AC380V | 距地高度 (Terrain clearance) | 920 ± 25mm |
| 最大消耗電力(Max Power) | 30A、15KW（基本配置） | 上下凈空 Up and Down Height | 上：100 mm 下：55 mm |
| 設備排風(Exhaust pipe) | 配備2個直徑150mm抽風口 | 預熱系統(Heater Unit) | |
| 助焊劑模塊(Flux Unit) | 下預熱系統(Down Heater) | 短波遠紅外預熱(Infrared Ray) | |
| 噴涂范圍(Spray Area) | 噴涂范圍為： L 500 × W 580 mm | 上預熱系統(Up Heater) | 熱風循環(Heated Air Circulation) |
| 噴涂精度(Spray Accuracy) | ±0.20mm, 點、線大小2至8mm可調 | 焊接模塊(Soldering Unit) | |
| 機器視覺單元(Vision Unit) | 錫爐材質(Materials) | 錫爐采用鈦合金或不銹鋼 可選(Ti or SUS) | |
| 視覺裝置(Machin Vision) | 自帶CCD和光源裝置 | 爐膽最大容量(Sn Capacity) | 約14KG |
| 視覺軟件(Vision Software) | 視覺輔助編程系統(Assist Software) 自動掃圖編程(Scanning Pattern) | 焊錫軸系統(Axle Precision) | X/Y/Z交流伺服電機控制精度±0.15mm |
| 激光變形測高 (Laser Change Detection) | 裸板變形測量,選配(Non-Standard) | 波峰檢測(Soldering Test) | 最大波峰高5.5mm ,自動校正(Automatic) |
