ARADING online medium selective wave soldering AS510M
Date：2020-11-20 Hits：749
Machine features:
1. Modular design, sliding door exterior design; Flexible configuration, single mode and single cylinder configuration;
2. Suitable for L350 × 400mm size PCB production, with the same function and minimal space occupation;
3. Suitable for multi variety and small batch production, making it easier to optimize solutions.
4. Quick programming, depicting welding trajectory based on images, simple and efficient.
5. Intelligent visual application, automatic scanning, point recognition correction, and anti dazzle design.
Flux flow monitoring, wave peak monitoring, and nitrogen protection throughout the welding process greatly improve wettability and ensure the quality of solder joints.
- Product Details
| 阿拉玎AS510M選擇焊規格參數 | |||
| 基本配置和要求(Basic Configuration) | 產品運輸系統(Transportation System) | ||
| 外形尺寸(Machin Size) | L*W*H= 1670*1510*1600 mm | 導軌調寬方式(Resizable ) | 軟件設定調整寬度(全段0.5mm喇叭口以內) |
| 工作范圍(Working Area) | L 350×W400mm（最大） | PCB傳輸方式(Transport) | 全部3都段采用滾輪傳輸,最大承載15kg |
| 電力要求(Electrical) | 5線 AC380V | 距地高度 Terrain clearance | 920 ± 25mm |
| 最大消耗電力(Max Power) | 30A、10KW（基本配置） | 上下凈空 Up and Down Height | 上：100 mm 下：55 mm |
| 設備排風(Exhaust pipe) | 配備2個直徑150mm抽風口 | 預熱系統(Heater Unit) | |
| 助焊劑模塊(Flux Unit) | 下預熱系統(Down Heater) | 短波遠紅外預熱 | |
| 噴涂范圍(Spray Area) | 噴涂范圍為： L 350×W 400 mm | 上預熱系統(Up Heater) | 熱風循環 |
| 噴涂精度(Spray Accuracy | ±0.20mm, 點大小2至 8mm可調 | 焊接模塊(Soldering Unit) | |
| 機器視覺單元(Vision Unit) | 錫爐材質(Materials) | 錫爐采用鈦合金或不銹鋼 可選(Ti or SUS) | |
| 視覺裝置(Machin Vision) | 自帶CCD和光源裝置 | 噴嘴保養(Nozzle Maintain) | 定量自動(Auto)清洗,選配(Non-Standard) |
| 視覺軟件(Vision Software) | 視覺輔助編程(Assist Software) 自動掃圖模式(Scanning Model) | 焊錫軸系統(Axle Precision) | X/Y/Z交流伺服電機控制精度±0.15mm |
| 激光變形測高 (Laser Change Detection) | 裸板變形測量,選配(Non-Standard) | 波峰檢測(Soldering Test) | 最大波峰高5.5mm ,自動校正(Automatic) |
